Detail

Araldite Standard Epoxy Adhesive (180g)

• Type: Adhesive
• Weight: 180g
• Flaunts a sturdy, textured handhold to provide optimum traction for a firm grip and control
• Uses: ARALDITE Standard bonds anything to anything like metals, ceramic, marble, granite, most plastic/PVC, ivory, asbestos, glass, wood, leather rubber etc. However it is not suitable for plastics like HDPE, PTFE and silicon rubber. How to Apply: Clean both the surfaces to be bonded. Take equal quantities(by volume) of resin and hardener of Adralite Standard. Mix the resin and hardner until it forms a uniform colour. Apply a thin coat of the mixture on both the surfaces. Join the surfaces and apply pressure using tape, clamps or band. Remove the pressure after 6 -8 hours. Full strength is achieved in 24 hours.
• Resin and Hardener : For best results : Roughen, dry and degrees surfaces to be bonded. Squeeze out equal amounts by volume, from both tubes. Mix thoroughly. Apply thin layer on both surfaces. Clamp joint overnight as Araldite sets.