Detail

PB25 PERF Foundry Boots-Protection against molten metal  splash, Shock Absorption, Heat Resistance, Moisture Wicking Textile Safety Boots

 

• Dual Density Rubber Mid Leg Foundry Boot.
• Made using only full grain leather and Kevlar stitching.
• Stainless Steel Protective Midsole – Min. 1100N.
• Meet or exceeds  EN ISO 20349:2010 S3 HRO HI CI SRC Fe Standards.
• We are the best seller of the product.

 

 

Upper: Full Grain Barton Print Buffalo Leather with Special Heat Resistant properties. (Leather 1.8-2.0mm)
Inner Lining: Moisture Wicking Textile to Vamp only.
Toe Cap: Steel Toe Cap Resistant to 200J.
Midsole: Stainless Steel Protective Midsole – Min. 1100N.
Sole Unit: Dual-Density Rubber/Rubber Soling System with Anti-static Properties, Shock Absorption, Heat Resistance to 300°C and SRC rated Slip Resistance.
Footbed: Moisture Wicking, Breathable, and Washable Footbed.
Additional Features: Kevlar Flame Resistant Stitching and Downward Facing Seams for Molten Metal runoff.

Areas of Application :
The PB25 is suitable for use in foundries for protection against molten metal splash. Made using only full-grain leather and Kevlar stitching, this product is highly flame resistant and conforms with the EN ISO 20349:2010 foundry standard. Featuring downward-facing seems the PB25 complies with the foundry standard to allow for molten metal run off.

Care Instructions :
For best performance, the upper should be kept clean and treated regularly with proprietary shoe polish. The sole unit should be checked regularly and kept free from debris. Footwear with obvious damage may not offer full protection and must be replaced.